Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Wincc RUNTime and s7 1200 connection problem

Created by: ahmetbogus at: 9/6/2011 8:08 PM (14 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

9/6/2011 8:08 PM	Rate (0)
ahmetbogus Posts: 14 Rating: (0)	hi for all members. i have a PC (win XP). ip address 192.168.0.2 installed Simatic.NET 2008 installed TIA portal v11 Pro, Wincc v11 pro and s7 1214dcdcrly CPU ip adress 192.168.0.1. dowloaded simple automation project on the CPU. in my project have DB1 and 2 real data but how can i config WinCC pro RUNTIME project to get datas on that DB1 datablock. DB1 not symbolic OK. ip settings OK. Connection setting NOT OK(red background) HMI tags NOT OK all (red background) Connections Settings not working i am confused. please any help will be good for me. Thank you
ahmetbogus Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

9/7/2011 11:35 AM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating: (161)	Hello, wich connection settings do you have set for the runtime? Maybe some screenshots are helpfull for us. best regards

Suggestion To thank Quote Answer

9/7/2011 1:47 PM	Rate (0)
ahmetbogus Posts: 14 Rating: (0)	here some screenshoots best regards Attachment scr.zip (1295 Downloads)
ahmetbogus Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

9/7/2011 1:59 PM	Rate (0)
ahmetbogus Posts: 14 Rating: (0)	another screenshoot my tags on DB1 . and all that screens on my settings not ok no comm. thanks p.s. 500kb upload limit is too small. Attachment p4.JPG (1211 Downloads)
ahmetbogus Posts: 14 Rating: (0)	Last edited by: ahmetbogus at: 9/7/2011 2:12 PM OS change by mistaken
Suggestion To thank Quote Answer

9/8/2011 12:12 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/12/2024 Posts: 4352 Rating: (1452)	Hi, can you explain what (should) do each of your 3 connections (P2.jpg
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

9/8/2011 4:39 PM	Rate (0)
ahmetbogus Posts: 14 Rating: (0)	Pegaia Hi, can you explain what (should) do each of your 3 connections (P2.jpg i am using only one connection.which i am tried 3 diiferent connection setting but no luck. there are 3 conncetion i am tested but each one of them are no connected to plc. by the way CPU firmware is v1.0.2
ahmetbogus Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

9/8/2011 4:49 PM	Rate (0)
atq100 Posts: 1 Rating: (0)	Hi, My guess is that WinCC Professsional V11 is not compatible with S7 1200. You should use WinCC Advanced instead. See the addedpicture (partof WinCC Professional readme file) regards Attachment WinCC professional and 1200.JPG (1345 Downloads)
atq100 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ahmetbogus

9/8/2011 8:29 PM	Rate (0)
ahmetbogus Posts: 14 Rating: (0)	but i am able to connect Wincc pro runtime with s7 1200 cpu. which is all my succesfully connected cpu is Firmware v2.0
ahmetbogus Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

9/9/2011 2:24 PM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating: (161)	If you connection as marked (orange) the settings are not correct.

Suggestion To thank Quote Answer

9/9/2011 4:19 PM	Rate (0)
ahmetbogus Posts: 14 Rating: (0)	here is the screen shot which i am connected to plc 1214 dcdcdc fw 2 on my win 7 pro machine atq100 Hi, My guess is that WinCC Professsional V11 is not compatible with S7 1200. You should use WinCC Advanced instead. See the addedpicture (partof WinCC Professional readme file) regards Attachment RT PRO.jpg (1313 Downloads)
ahmetbogus Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on