3/24/2023 6:16 PM | |
Joined: 12/18/2014 Last visit: 8/20/2024 Posts: 33589 Rating:
|
Now that I know how to set up my LOGO! again, I dared to transfer your program to my LOGO! again. The effect is the same. The LOGO goes into a STARTUP loop and cannot be reached. The reset tool can you download from here: Reset Tool for resetting LOGO! 8.3 to the delivery state |
Last edited by: ixo65 at: 03/24/2023 18:24:21 |
|
3/24/2023 6:39 PM | |
Joined: 12/18/2014 Last visit: 8/20/2024 Posts: 33589 Rating:
|
In your case I would also update the LWE to the current version V1.1.1. |
3/27/2023 11:45 AM | |
Joined: 12/18/2014 Last visit: 8/20/2024 Posts: 33589 Rating:
|
I made a screenvideo for transferring your LSC program to my LOGO! 8.3 and a second video of the LOGO! display after transferring. The first video send I to you via PM, because the screen video shows the diagram of your program. The second video I attach to this post. Edit: My LOGO! 8.3 is from december 2020, FS1, FW1.83.01. But I upgraded the firmare to V1.83.02. 6ED1052-1MD08-0BA1 LSC version: V8.3.1 AttachmentLOGO! 8.3 don't start.zip (536 Downloads) |
Last edited by: ixo65 at: 03/27/2023 11:46:44Last edited by: ixo65 at: 03/27/2023 11:57:51Last edited by: ixo65 at: 03/27/2023 11:59:03Last edited by: ixo65 at: 03/27/2023 12:00:37 |
|
Follow us on