2/22/2024 9:36 AM | |
Joined: 2/21/2024 Last visit: 5/6/2024 Posts: 4 Rating:
|
Hello, I would like to communicate between 2 locomotives equipped with ET200SP. The coupling of the locomotives being random, I constantly need to make a new communication between the 2 locomotives. I would like to see this no longer done by computer but automatically. That's why I thought of the DHCP network that would allow me to change the IP address of the new mated locomotive so that it communicates with the other. Having no knowledge of this type of network, I wondered if this is really possible. Thank you for your help! ------------------------------------------------------------------------------------------ |
Last edited by: The Helping Hand at: 02/23/2024 09:28:00New subject after splitting |
|
2/23/2024 9:28 AM | |
Joined: 8/21/2014 Last visit: 7/18/2024 Posts: 995 Rating:
|
Closed cause question posted twice. The second thread with the subject Communicate between 2 locomotives controlled by ET200SP PLCs is published within the conference Communication / Networks Best regards, |
My Forum is the place to personalize your profile, |
|
Follow us on