bergmanu

Hi, 

since we had a few changes regarding the pre-installed software I want to give you an overview about the different versions of the two IOT2050 devices. 

The FS (functional state) indicates in which "status" the device is delivered. 

IOT2050 Basic (6ES7647-0BA00-0YA2):

• FS:01 = First hardware version (PG1)
• FS:02 = Second harware version (PG2)
• FS:04 = Hardware redesign - no functional change to FS:02 (PG2)
  
• FS:05 = Update firmware to V1.3.1

• FS:02/04/05 require Example Image from V1.2.1

The FS:03 had a small redesign as well, but as far as I know this was never delivered due to material shortage.

IOT2050 Advanced (6ES7647-0BA00-1YA2): 

• FS:01 = Delivered without pre-installed Industrial OS (empty eMMc)
• FS:02 = Delivered with pre-installed Industrial OS on eMMC. Default boot device: eMMc
• FS:03 = Delivered with pre-installed Industrial OS on eMMC. Default boot device: SD Card
• FS:04 = Second harware version (PG2) without pre-installed Industrial OS (empty eMMc)
• FS:05 = Hardware redesign - no functional change to FS:04 (PG2) (still empty eMMc)
• FS:06 = pre-installed Industrial OS V3.2.1; firmware version V1.3.1
• FS:07 = pre-installed Industrial OS V3.2.2; firmware version V1.3.1

• FS:04/05/06/07 require Example Image from V1.2.1 or Industrial OS from V3.2.1

IOT2050 Advanced M.2 (6ES7647-0BB00-1YA2):

M.2 variant requires Example Image from V1.3.1 or Industrial OS from V3.2.1

• FS:01 = pre-installed Industrial OS V3.2.1; firmware version V1.3.1
• FS:02 = pre-installed Industrial OS V3.2.2; firmware version V1.3.1

I will update this list whenever we release new FS versions.

Currently delivered FS are in written in italic style.

Best regards!

 I'm trying to boot the v1.02.01 image on FS:07, it unbootable. 

May i know how to check the firmware install in FS:07? can i downgrade the firmware in FS:07 to accept the v1.02.01 image?

Thanks.

------------------------------------------------------------------------------------------
Split from Overview about FS states of IOT2050.

Closed cause question posted twice.

The second thread with the subject 6ES7647-0BA00-1YA2 FS:07 unable to use the image V1.0.2 is published within the conference IOT2050.