Navigation

Can´t boot Example image V1.1.1

Created by: MichiSoft at: 5/23/2023 5:45 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

5/23/2023 5:45 PM

Rate (0)

MichiSoft

Member

Joined: 7/11/2016

Last visit: 8/31/2024

Posts: 2

Rating:

(0)

Hello,

Unfortunately I have the problem that the example image V1.1.1 does not want to boot because the kernel goes into panic.

I have an IOT2050 Advanced with FW02 that has already been reset once and there is no Industrial OS on the internal memory.

Here the error message as .txt

Please help me. Thanks in advance.

Kind regards

Michael Dietl

Attachment

output_Putty.txt (693 Downloads)

6/1/2023 8:44 AM	Rate (0)
apastore Regular Expert Joined: 10/22/2020 Last visit: 10/1/2024 Posts: 169 Rating: (6)	Hi Michael, After studying your log, I am sure of your problems: the SD and MMC controllers do not start correctly: mmc1: Unknown controller version (4). You may experience problems. and mmc0: Unknown controller version (4). You may experience problems. These messages refer, as said, to the SD/MMC host controller. It doesn't recognise the controller version, which may be causing your problems. What FS version of the IOT2050 do you currently have and do you have the ability to update the firmware version? BR

Suggestion To thank Quote Answer

6/1/2023 12:47 PM	Rate (0)
MichiSoft Member Joined: 7/11/2016 Last visit: 8/31/2024 Posts: 2 Rating: (0)	Good day, unfortunately I do not know the FS version. But to perform a firmware update I need a running OS, which unfortunately is not available.

Suggestion To thank Quote Answer

7/5/2023 8:58 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/5/2024 Posts: 3345 Rating: (379)	Hi, this problem is known, but we don't know why this happens. You need to use Example Image V1.0.2 and modify the BUILD_ID in /etc/os-release. IOT2050 Bricked? - 297151 - Industry Support Siemens If you need the image V1.0.2, please send a DM. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

7/10/2024 5:06 PM	Rate (0)
AutoGen_5326802 Regular Member Joined: 8/22/2016 Last visit: 10/15/2024 Posts: 1 Rating: (0)	Hi all, I encounter the same problem, can the example image V1.0.2 still be downloaded somewhere? Kind regards

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users sinhle

7/11/2024 12:30 PM	Rate (0)
uweda Joined: 3/12/2024 Last visit: 11/7/2024 Posts: 71 Rating: (0)	Hi all, everybody who wants to have this example image please contact me here directly via DM. BR
	Last edited by: uweda at: 07/11/2024 12:30:28
Suggestion To thank Quote Answer

Share this page:

Share this page on...

SiePortal

Can´t boot Example image V1.1.1

Created by: MichiSoft at: 5/23/2023 5:45 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

MichiSoft

Attachment

apastore

MichiSoft

bergmanu

AutoGen_5326802

This contribution was helpful to

uweda

Last edited by: uweda at: 07/11/2024 12:30:28

6 Entries

Related topics by keywords:

Follow us on

SiePortal

Created by: MichiSoft at: 5/23/2023 5:45 PM (5 Replies)

Rating (0) Thanks 1

6 Entries

Attachment

This contribution was helpful to

Last edited by: uweda at: 07/11/2024 12:30:28

6 Entries

All about IOT2050

Related topics by keywords:

Follow us on

Rating (0)

Thanks 1