Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Inputs

Created by: audy at: 2/23/2007 9:50 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/23/2007 9:50 AM	Rate (0)
audy Posts: 71 Rating: (2)	Hellow every one I read in the documents that the max. number of inputs used at the same time is 75% of the total number, is this right or I missed understanding? thanks
audy Posts: 71 Rating: (2)
Suggestion To thank

2/27/2007 11:12 AM	Rate (0)
Pee Ell Sea Posts: 672 Rating: (57)	HI, Not sure where you read that ! All inputs in the process image are read every scan. There could possibly be an output card that cannot drive full current on all outputs at the same time due to thermal problemsbut that would be a hardware limitation of the card not the plc.
Pee Ell Sea Posts: 672 Rating: (57)
Suggestion To thank

2/28/2007 1:35 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/12/2024 Posts: 4112 Rating: (195)	Closed: cause topic posted twice. Here you will find the second topic and further answers:Inputs in the conference SIMATIC S7-300 / S7-300F. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on