Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TRAORI Help

Created by: esuuk at: 1/31/2007 3:55 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

1/31/2007 3:55 PM	Rate (0)
esuuk Posts: 1 Rating: (0)	My Dept is new to 840D controls and we are trying to understand the TRAORI command - Is there a beginners guide to TRAORI or could someone explain how it differed from conventional Axis translations? thanks
esuuk Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/10/2007 9:12 AM	Rate (0)
SteveJ Posts: 328 Rating: (29)	Dear Sir For further information regarding TRAORI and other assocaiated functions, Please see: https://www.automation.siemens.com/doconweb/content.asp?item=4607&cd=sinumerik_0107_e&scope=all Best Regards SteveJ
SteveJ Posts: 328 Rating: (29)
Suggestion To thank Quote Answer

2/28/2007 6:08 PM	Rate (0)
SeeManEGV Member Joined: 2/28/2007 Last visit: 3/12/2007 Posts: 4 Rating: (0)	Call me at (847) 952-4246 (Chicago time zone). I have prepared a lot of material on programming the 840D that I can share with you.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Berserk

|

Share this page:

Share this page on...

Follow us on