Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how set for control panel address in F

Created by: io ba at: 11/7/2007 5:52 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/7/2007 5:52 PM	Rate (0)
io ba Experienced Member Joined: 7/20/2007 Last visit: 10/14/2024 Posts: 43 Rating: (4)	how set for control panel address inF? this setting is maked in hardware or soft? thank's
	Last edited by: CS Moderator at: 08.11.2007 13:39 new subject after splitting plc.nanospic.com
Suggestion To thank Quote Answer

11/7/2007 9:03 PM	Rate (0)
io ba Experienced Member Joined: 7/20/2007 Last visit: 10/14/2024 Posts: 43 Rating: (4)	hi! https://support.automation.siemens.com/WW/llisapi.dll/csfetch/22102147/463_840+Interface+Part+2+Connection+Conditions.pdf?func=cslib.csFetch&nodeid=22102886&forcedownload=true pag. 5.2 for settings operator panel
	plc.nanospic.com
Suggestion To thank Quote Answer

11/23/2007 4:52 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 11/11/2024 Posts: 4072 Rating: (357)	hi, why u want to set it to F, the default setting should be E(using HW switch).the starting address for I/Q is set by PLC MD.
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on