Navigation

TRUMPF L3030 - NCU error - MN_IPO_PARAM_NAME_TAB

Created by: bencaha at: 7/27/2020 9:19 AM (1 Replies)

7/27/2020 9:19 AM	Rate (0)
bencaha Posts: 13 Rating: (0)	Good day, we have a problem with our TRUMPF L3030 laser - year of manufacture 1998. Started writing NCU startup error (00.004010): Invalid identifier used in machine data $ MN_IPO_PARAM_NAME_TAB [1] I enclose pictures of the error in the attachment. I have if so floppy NCU or I think it can be stored on disk. Don't know how to upload to your PLC via PC? Thank you very much for your answers. [snip] Attachment Screenshots.zip (255 Downloads)
bencaha Posts: 13 Rating: (0)	Last edited by: Jen_Moderator at: 07/27/2020 10:14:14 Removed links and added files as an attachment.
Suggestion To thank Quote Answer

7/29/2020 2:08 PM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Hello, Prior to this alarms, have you come across any alarm related with NCU battery? or is your machine power supply was OFF for long time? By the way please read your another post where in I replied on how to clear NC/PLC data & reload. But my suggestion to you is, before you clear NC/PLC data on your machine, please confirm floppies with back up are OK & are readable condition.

Suggestion To thank Quote Answer