Hi Nico R 14,

So you are trying to configure a "tag" dynamization for the process value parameter of the IO field? This will fail if you try to use a property instead of a tag. This is because the faceplate cannot change a property value, but it can change a tag value (if the tag allows it).

Kind regards
Stefan

Hi Nico R 14,

But the reason is the same. If you choose "Tag" for dynamization, you can only use tags, not properties. To use a property for dynamization, you have to use a script. However, if you use scripting for dynamization, you have to set a trigger, which is not so convenient in this case. So I would suggest to use the OnLoaded event of the faceplate to change the output format of the IO file, since I expect that the format will not change while the faceplate is displayed.

Kind regards
Stefan

Hello Nico R 14

yes as Stefan suggested you can only dynamise this by script like this:

Or you use another trigger on a script directly on the property

Bye Murof