hello every body 

i need a special blokc that makes only one statement out of N statements (conditional statement) and leaves immediatly the block

it's impossible to have both two conditions activated at the same time that's why i want to leave immediatly

Any one can help me 

What if the condition of that particular statement is true for more than one cycle?

It would be nice if u can give us some more information about the usecase.

FDL, LAD: use a jump to the last network

STL: use BEC

miami

FDL, LAD: use a jump to the last network

STL: use BEC

For the S7-1200 & LAD - use the RET function.
The   ---(RET)   function also have some extra functionality [hint]
w

mamadou13

i need a special blokc that makes only one statement out of N statements (conditional statement) and leaves immediatly the block

 If I understood it well, you need CASE-like instruction.

Use auxilary variable and set it to different values in each step. Then execute CASE based on the value of this variable.

William_B

miami

FDL, LAD: use a jump to the last network

STL: use BEC

For the S7-1200 & LAD - use the RET function.
The   ---(RET)   function also have some extra functionality [hint]
w

 Thank you man ! you  save me as usual 

William_B=Legend 

mamadou13

 Thank you man ! you  save me as usual 

William_B=Legend 

To thank you for such a nice compliment (thanks!)
and
because I hope to be rewarded some star rating..

---------------------------------------------------------------------- 1
Please see attached image - it gives an example if using JMP and RET functions for evaluating boolean conditions. Be very carefull - if you use    ----(   )   coil functions in jump functions (where the samples use MOVE), you are inviting trouble.

---------------------------------------------------------------------- 2

---------------------------------------------------------------------- 3