Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Send "PAS_Command_Integer_V500" from a VB script

Created by: AutoGen_559909 at: 9/2/2024 8:25 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/2/2024 8:25 AM	Rate (0)
AutoGen_559909 Joined: 4/28/2015 Last visit: 10/12/2024 Posts: 2 Rating: (0)	Hi everyone, How can I send "PAS_Command_Integer_V500" from a VB script? ------------------------------------------------------------------------------------------ Split from Commands in sequence using C/VB script.
	Last edited by: Moderator_Lan at: 09/02/2024 10:28:43 New subject after splitting
Suggestion To thank Quote Answer

9/12/2024 8:22 AM	Rate (0)
Fess Advanced Member Joined: 1/22/2009 Last visit: 11/12/2024 Posts: 120 Rating: (17)	Hello If you want to start a C-Script from VBS you need to know that both Scripts works parallel. Your VBScript wil not wait for the result of C-Script. you can start a C-Script from the VBS only via WinCC Tags Or Properties of one of the WinCC-Objects: 1. About WinCC Tags: you create a C-Script Action with Tag Trigger, in VBS you set the Tag trigger, Action starts, in C you reset the TagTrigger. 2. About properties: You create a dummy object( e.g. Circle), set it invisible. Via VBS you change some Property (e.g. BackColor) in your Object by "Events -> Properties -> e.g. BackColor -> Change" you create your needed C-Script. BR, Fess
	Last edited by: Fess at: 09/12/2024 08:24:23
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on