Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Motor Control with Dual Sensor Inputs

Created by: AutoGen_5085234 at: 3/18/2024 9:31 AM (25 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

4/17/2024 7:31 AM	Rate (0)
AutoGen_5085234 Joined: 12/15/2023 Last visit: 5/28/2024 Posts: 58 Rating: (0)	et juste je sais que je suis un peu chiant mais dans se post je ne parle pas de connecter un capteur. je demande pourquoi j ai 2 valeur a une entrée analogique en présisant les capteur uniquement pour que vous puissuer m'aider et dans l'autre je demande de l' aide pour en trouver un capteur desoler de forcer autant mais je comprends je vais poster les 2 question ici ce n'est pas grave mais je ne trouve pas sa pratique merci and I just know that I'm a bit annoying but in this post I'm not talking about connecting a sensor. I ask why I have 2 values on an analog input by specifying the sensors only so that you can help me and in the other I ask for help to find a sensor sorry to force so much but I understand I will post the 2 questions here it doesn't matter but I don't find it practical thanks you
	Last edited by: AutoGen_5085234 at: 04/17/2024 07:43:29
Suggestion To thank Quote Answer

4/17/2024 7:42 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34239 Rating: (4263)	I'm sorry, but I no longer understand your questions. Maybe I'm too stupid. Maybe another user can help you.

Suggestion To thank Quote Answer

4/17/2024 7:50 AM	Rate (0)
AutoGen_5085234 Joined: 12/15/2023 Last visit: 5/28/2024 Posts: 58 Rating: (0)	non je ne pense pas que se soit réelement vous le probléme je ne connais peut étre pas les terme et la transition anglais francais que j'essaie de corriger avec mon maigre nivaux d anglais n aide pas je vais réaissaier une derniére fois de reformuler: -ma question porte sur les 2 valeur que vous pouvez voir dans la photo que j' ai envoyer je me pose la question entre le 50 et le 400 lequelle et la valeur du capteur? le 50? No, I don't think you're really the problem. I may not know the terms and the translation English-French dont help i I am trying to correct but my poor English skills don't help I'm going to try again one last time to rephrase: -my question concerns the 2 values that you can see in the photo that I sent I wonder between the 50 and the 400 which one is the value of the sensor? the 50? Attachment image_2024-04-17_095001898.png (270 Downloads)
	Last edited by: AutoGen_5085234 at: 04/17/2024 07:50:41 Last edited by: AutoGen_5085234 at: 04/17/2024 07:51:21
Suggestion To thank Quote Answer

4/17/2024 7:57 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34239 Rating: (4263)	The two values shown in your screenshot are the value of the A/D converter of the analog input and then the scaled value after the analog amplifier.

Suggestion To thank Quote Answer

4/17/2024 8:11 AM	Rate (0)
AutoGen_5085234 Joined: 12/15/2023 Last visit: 5/28/2024 Posts: 58 Rating: (0)	la valeur de A/D est la valeur du capteur, le 50 sur la photo que j'ai envoyer .c'est sa? the value of the A/D is the value of the sensor, the 50 on the picture i send. true? thanks you

Suggestion To thank Quote Answer

4/17/2024 8:15 AM	Rate (0)
AutoGen_5085234 Joined: 12/15/2023 Last visit: 5/28/2024 Posts: 58 Rating: (0)	si se que j'écrit est correct alors je me permet de vous poser ma seconde question qui est que je ne trouve pas de capteur de vitesse avec une sortie analogique pour envoyer l'information a un afficheur if what I write is correct then I allow myself to ask you my second question which is that I don't can't find a speed sensor with an output analog to send information to a display

Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on