Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Change start picture in working area?

Created by: Ubbe at: 6/21/2006 2:45 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

6/21/2006 2:45 PM	Rate (0)
Ubbe Posts: 4 Rating: (0)	I want to change the picture in the workingarea that shows when PCS7 runtime starts? The picture that shows is @screen.pdl, @1001.pdl, @welcome.pdl! I want to have @screen.pdl, @1001.pdl, mypicture.pdl! How can i do that?
Ubbe Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/21/2006 3:21 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, as so often, an FAQ can give some hints [:D] http://support.automation.siemens.com/WW/view/en/8681434 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/22/2006 8:04 AM	Rate (0)
Ubbe Posts: 4 Rating: (0)	That FAQ doesn't work, my startpicture shows for one second then @welcome.pdl i shown. But if i want to have different pictures on each screen (2 screens) and different sets of buttons at the bottom (@Button11.pdl and @Button12.pdl) how do i do that? It dosn't work with just changing the name in @screen.pdl
Ubbe Posts: 4 Rating: (0)	Last edited by: Ubbe at: 6/22/2006 8:52 AM
Suggestion To thank Quote Answer

6/22/2006 12:26 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, why don´t you save your picture as "welcome.pdl" and then exchange it with the original welcome.pdf??? Quick and easy :-) The same with the @button11.pdl => just open this picture with graphics designer and adapt to your needs... nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users faraham

6/22/2006 12:31 PM	Rate (0)
Ubbe Posts: 4 Rating: (0)	Ok, i have already done that! But if i want to have different pictures on each screen (2 screens / client) and different sets of buttons at the bottom (@Button11.pdl and @Button12.pdl) how do i do that?
Ubbe Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/22/2006 1:30 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	as I´ve said before: open the @button11.pdl in Graphics Designer and change it. The problem with changing system-pictures is, that user should not change these pictures. The next run of theOS-Editor will exchange them to the original system pictures. nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on