Navigation

programming cyclic interrupts in S7

Created by: anaMari at: 10/11/2005 5:45 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/11/2005 5:45 PM

Rate (0)

anaMari

Posts: 6

Rating:

(1)

Hi all,
I am working with a PLC S7-300 CPU 315-2DP
I programmed an OB32 for sending data over an ethernet, but when I try to download it to the PLC I get this message:

(D20C) OB cannot be copied as the associated
priority class does not exist.
Unable to copy the block OB32

It is the first interruption I have ever programmed, so I don't know the reason for the error.
I just copied the OB32 from the Standard library and programmed what I wanted it to do,Have I missed something?

Greetings and Thank you in advance,
Ana

10/12/2005 8:16 AM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 10/24/2024 Posts: 414 Rating: (28)	Hi Ana, If you look at the properties of the CPU in the hardware configurator you will see that the OB32 is not available for this CPU. The only cyclic interrupt you can use is the OB35.
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank

10/12/2005 11:58 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 10/25/2024 Posts: 4109 Rating: (195)	Closed: cause topic posted twice. Here you will find the second topic with all responses: problem with Cyclic interrupts in S7-300
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

Share this page:

Share this page on...

Created by: anaMari at: 10/11/2005 5:45 PM (2 Replies)

Rating (0) Thanks 0

3 Entries

3 Entries

All about STEP 7 / STEP 7 Lite

Follow us on

Rating (0)

Thanks 0