Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Image has only v8.16 - it always crashed

Created by: GiuseMendoza at: 2/11/2021 12:36 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/11/2021 12:36 AM	Rate (0)
GiuseMendoza Posts: 1 Rating: (0)	Thanks, just I had problems running node-s7-contrib-library: the last version is 3.0.0 that need node.js v10 or superior but the image only has v8.16 so it always crashed. ------------------------------------------------------------------------------------------ Split from Deleting node-red flow on device.
GiuseMendoza Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 02/11/2021 12:57:28 New subject after splitting
Suggestion To thank Quote Answer

2/11/2021 10:26 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, for the IOT2040 you need to install node-red-contrib-s7@2.1.1, because of the reasons you mentioned. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on