8/2/2022 5:06 AM | |
Joined: 1/4/2021 Last visit: 5/19/2024 Posts: 17 Rating:
|
Good Moring all...!! Hope you are doing well, We have an issue in one Siemens PLC rack, One FM module 458-1 is frequently stopping with the below logs : Event 10 of 69: Event ID 16# 4546 STOP caused by CPU memory management Previous operating mode: RUN Requested operating mode: STOP (internal) Internal error, Incoming event 09:47:26.812 PM 01/01/1994 (Coding: 16# 4546 FF84 C0C0 0305 0000 0000) Event 11 of 69: Event ID 16# 6523 Memory reset request due to error accessing memory submodule No relevance for the user (Z2): 8080 (Z3): 5411 Operating mode: RUN Internal error, Incoming event 09:47:26.812 PM 01/01/1994 (Coding: 16# 6523 FF08 C400 0000 8080 5411) We replaced the FM module with a new one with an Old MMC card, system work more than 17 hours but again repeated the issue with the same log, We need urgent online support to investigate the matter and advise us accordingly. I replaced the module but still issue , think issue is memory card side but i am Not able to copy the MMC card program to new MMC card, and also facing Issue in online download to MMC card because system ask compilation , error during the compilation. ------------------------------------------------------------------------------------------ AttachmentDiagnose_20220731_1055.txt (602 Downloads) |
Last edited by: TechAutomat at: 08/02/2022 05:11:05Last edited by: TechAutomat at: 08/02/2022 05:12:06Last edited by: Jen_Moderator at: 08/02/2022 11:15:35New subject after splitting |
|
8/2/2022 6:01 AM | |
Joined: 8/25/2006 Last visit: 8/15/2024 Posts: 2208 Rating:
|
Hello. What errors do you have during compilation, show the error log. Do you have USB Prommer 6ES7792-0AA00-0XA0? |
8/2/2022 11:08 AM | |
Joined: 1/4/2021 Last visit: 5/19/2024 Posts: 17 Rating:
|
|
Last edited by: TechAutomat at: 08/02/2022 11:14:04 |
|
Follow us on