4/10/2024 7:52 PM | |
Joined: 6/11/2021 Last visit: 8/9/2024 Posts: 2 Rating:
|
Hello Automation_***, Have you find a solution? i have the same problem... |
4/11/2024 11:20 AM | |
Joined: 10/11/2006 Last visit: 8/16/2024 Posts: 5896 Rating:
|
Hello, motion control Position takes the ActualPosition value, when you use MC_MoveVelocity with the mentioned settings. Velocity :0 and not PositionControlled. 8.7 MC_MoveVelocity V8 (S7-1500, S7-1500T) https://support.industry.siemens.com/cs/ww/en/view/109817884 |
With best regards, |
|
This contribution was helpful to
1 thankful Users |
Follow us on