5/7/2024 4:15 PM | |
Joined: 12/18/2014 Last visit: 8/17/2024 Posts: 33576 Rating:
|
And should this pattern be repeated over and over again? |
This contribution was helpful to
1 thankful Users |
5/7/2024 4:24 PM | |
Joined: 10/4/2023 Last visit: 5/7/2024 Posts: 13 Rating:
|
This pattern should increase until time off reaches 30 seconds when increasing in 5 second intervals. |
5/7/2024 4:28 PM | |
Joined: 12/18/2014 Last visit: 8/17/2024 Posts: 33576 Rating:
|
And then? Start over again? Or quit? |
5/7/2024 4:31 PM | |
Joined: 10/4/2023 Last visit: 5/7/2024 Posts: 13 Rating:
|
The program would then quit. |
5/7/2024 4:37 PM | |
Joined: 10/4/2023 Last visit: 5/7/2024 Posts: 13 Rating:
|
After the 30 second switch it should end. |
5/7/2024 5:00 PM | |
Joined: 12/18/2014 Last visit: 8/17/2024 Posts: 33576 Rating:
|
Try this.
AttachmentIncrease_off_time_0BA8.Standard.zip (137 Downloads) |
5/7/2024 5:36 PM | |
Joined: 10/4/2023 Last visit: 5/7/2024 Posts: 13 Rating:
|
That appears to be just what I needed. Thank you so much for the help!! |
This contribution was helpful to
1 thankful Users |
Follow us on