5/30/2024 12:08 PM | |
Joined: 10/11/2006 Last visit: 8/16/2024 Posts: 5896 Rating:
|
Dear MattiasvdBerg, please check if the functionality of MC_Torquelimiting would be an option for your application. It would be conceivable to reduce the torque limit in defined steps or in a defined ramp. The drive will move backwards according to the attached torque until the torque is low enought to turn off the drive. In combination with Safety you can use SS1E. Please find detailled information about MC_Torquelimiting in the folowing manual: https://support.industry.siemens.com/cs/ww/en/view/109817884 |
Last edited by: Jen_Moderator at: 05/31/2024 10:41:28Link optimized. With best regards, |
|
Follow us on