10/14/2018 6:06 PM | |
Posts: 7 Rating:
|
Dear Sir, First of all I am really very very thankful for your quick response. I have no words to show my expressions I am really in great trouble these days Now come towards the problem that I am facing from last 7 days. I am trying to communicate Shinko controller DCL 33A with my PLC. I use pin 4,8 and 11 of CP341 RS422/RS485 and 1(COM), 3 and 4 of Shinko Controller (The manual of controller is also in the attachment, the important points that I used is also highlighted). I also swap the wire many times but it proved not fruitful for me. Before Swap: Pin 4 (CP341) with Pin 3 (Shinko controller) Pin 11 (CP341) with Pin 4 (Shinko Controller) Pin 8 (CP341) with Pin 1 (Shinko Controller) After Swap: Pin 4 (CP341) with Pin 4 (Shinko controller) Pin 11 (CP341) with Pin 3 (Shinko Controller) Pin 8 (CP341) with Pin 1 (Shinko Controller) Note : I also try to use master - salve without GROUND, in short I try to use almost all options regarding WIRING point of view but no results. One more thing is also very interesting; whenever i follow AFTER SWAP wire connection both TX and RX light blinks but when we power OFF - ON the CPU the CP goes to fault mode and red SF light shows on the CP. So I am sure AFTER SWAP wiring option is not the correct one. Please find the attachments for more details. I am really really very very thankful to you, please guide me. Kind Regards
AttachmentPART1.zip (507 Downloads) |
10/14/2018 6:12 PM | |
Posts: 7 Rating:
|
AttachmentPART2.zip (527 Downloads) |
10/14/2018 6:24 PM | |
Posts: 7 Rating:
|
AttachmentSlave Information.pdf (579 Downloads) |
Last edited by: projects_mes at: 10/14/2018 6:24:47 PM |
|
10/14/2018 6:26 PM | |
Posts: 7 Rating:
|
Dear Sir, I also PM you, Waiting for your kind help Kind Regards
AttachmentShinko DCL 33A Protocol.pdf (515 Downloads) |
Follow us on