7/10/2020 7:53 AM | |
Joined: 9/28/2018 Last visit: 8/19/2024 Posts: 6 Rating:
|
I have transferred an image from the SD card with dd. Afterwards I removed the SD card and rebooted. Now the IOT does not boot from the eMMC or the SD card. This is now the 2nd device with this symptom. I hope you can help me. ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 07/13/2020 08:09:40New subject after splitting |
|
7/10/2020 8:23 AM | |
Joined: 4/28/2015 Last visit: 6/3/2024 Posts: 3345 Rating:
|
Hi, the STAT LED is blinking red? That is really weird, I never had that behavior following these instructions. Do you have a TTL cable like this one? Best regards! |
Not working for IOT2050 support anymore from March 1st, 2024. |
|
Follow us on