Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Level Measurement

Created by: Sebastian_NLS at: 4/11/2008 1:45 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/11/2008 1:45 PM	Rate (0)
Sebastian_NLS Posts: 32 Rating: (0)	Hello, i need measurement a level of paraffin, min level, max level (its posible whit a analog sensor) and max-max level. The paraffin are at 120ºC max. Please a i need know any sensor than work in an ambient at 120ºC. Best Regards.
Sebastian_NLS Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

4/13/2008 12:25 AM	Rate (0)
SonicRanger Posts: 151 Rating: (8)	Hi Sebastian NLS, for continuous measurement, you can use different technologies. As I prefer non-contacting my choices would be: - Ultrasonic: Multiranger 100/200 with XCT-12 sensor (12 m range) - Radar: Sitrans LR250, because of the low dk-value of paraffine. For level switches, you can use a Pointek CLS300. Best Regards, SonicRanger.
SonicRanger Posts: 151 Rating: (8)
Suggestion To thank Quote Answer

4/13/2008 10:18 AM	Rate (0)
hashemi teimoor Posts: 22 Rating: (0)	Hi SonicRanger I have a question from you Please see this Thread Need information about configuration and programming SIPART DR24 or mail to me at: hashemi-te@esfahansteel.com Thanks hashemi
hashemi teimoor Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIPART

Follow us on