3/24/2022 10:01 AM | |
Joined: 11/19/2021 Last visit: 8/30/2023 Posts: 9 Rating: (0) |
Hi, I have a problem controlling my G120C PN with S7 1200. I am using standard telegram 1 and i followed thes video on how i should set it up: https://www.youtube.com/watch?v=B0hzO7p_l3I I can control the drive with my computer but when i try to do it with my PLC nothing happens. I also have a HMI in the same network. I dont know if my connection is set wrong or if i programmed the telegram wrong but i dont know how to fix it. I attached some screenshots i thougt would be usefull. |
Last edited by: JanR11 at: 03/24/2022 10:02:09Last edited by: Jen_Moderator at: 03/24/2022 11:44:43Embedded video. |
|
3/25/2022 11:30 AM | |
Joined: 11/19/2021 Last visit: 8/30/2023 Posts: 9 Rating: (0) |
Hi, this is my program. The functions i use to control the drive is in folder motor. there are also some tags in motor tags used for I/O. i couldnt upload the zip file because its to large, so here is a drive link, sorry https://drive.google.com/drive/folders/1khOHMAeRt3GfQrlgtoumTFjHpXj6xcuG?usp=sharing |
Follow us on