7/16/2021 6:01 PM | |
Joined: 8/21/2020 Last visit: 1/25/2024 Posts: 8 Rating: (0) |
Hi, Thank You it works... One more thing i want to achieve in my above project. i want to allow motor to move like when Execute=1 : Motor will Move Execute=0 : Motor Will stop Moving. Please guide me how to achieve this and which parameters need to update or how could i program for same... Thanks in advance... ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 07/19/2021 07:11:06New subject after splitting |
|
7/23/2021 9:25 AM | |
Joined: 10/11/2006 Last visit: 5/17/2024 Posts: 5843 Rating: (793)
|
Hello, for this you need logic in PLC. You canuse MDI and "IntermediateStop". With positive edge you start and deactivate "IntermediateStop". With negative edge you activate"IntermediateStop", SINAMICS V90 PN: Basic Positioner (EPos) https://support.industry.siemens.com/cs/de/en/view/109747750 |
With best regards, |
|
Follow us on