9/15/2021 2:29 PM | |
Joined: 12/18/2014 Last visit: 8/7/2024 Posts: 33504 Rating:
|
I can't say anything for sure about that. But I wouldn't do it.
|
This contribution was helpful to
1 thankful Users |
9/15/2021 9:04 PM | |
Joined: 6/11/2019 Last visit: 8/5/2024 Posts: 2207 Rating:
|
It won't work that way.You also need an IO-Link master with Modbus TCP interface.However, I guess that your logo is overwhelmed with this encoder. Ella_68 |
9/17/2021 7:51 AM | |
Joined: 8/16/2021 Last visit: 1/4/2022 Posts: 15 Rating:
|
Okay, so I could use this AL1340 - IO-Link, and my LOGO! should connect to the encoder, and everything should work? |
Follow us on