10/11/2019 10:42 PM | |
Joined: 4/21/2015 Last visit: 7/21/2024 Posts: 56 Rating:
|
yes but dont work and stuck at SIMATIC HMI page
|
This contribution was helpful to
1 thankful Users |
10/12/2019 11:54 AM | |
Joined: 3/9/2018 Last visit: 8/31/2024 Posts: 189 Rating:
|
It's just the picture or its also showing text and info (model/bootloader version) at lower left corner? The panel "should" go to recover mode if it finds a USB stick with the correct .FWF file on it before it's resuming booting. Make sure you use a USB stick with FAT32 as a filesystem. (format) USB sticks of 32G/64G/128G should work,but to be sure, use USB stick of 8GB or less. See https://www.youtube.com/watch?v=TFplHjZPBDk how the recovery is showing up. |
Last edited by: Henry1675 at: 10/12/2019 11:56:10Last edited by: Henry1675 at: 10/12/2019 12:00:48Last edited by: Henry1675 at: 10/12/2019 12:01:28Last edited by: Jen_Moderator at: 10/14/2019 09:44:57Embedded video. |
|
10/15/2019 11:26 PM | |
Joined: 4/21/2015 Last visit: 7/21/2024 Posts: 56 Rating:
|
This is the way for Ktp basic panels. Tp Comfort panels do not use this method to return to factory settings.
|
9/28/2021 5:59 PM | |
Posts: 3 Rating:
|
I have same problem 😭 could you please help me for solving this issue?? |
Follow us on