10/20/2022 2:27 AM | |
Joined: 12/18/2014 Last visit: 5/11/2024 Posts: 33015 Rating: (4079)
|
Without LSC you have no chance, because your LOGO! has no display. |
10/20/2022 2:56 AM | |
Joined: 12/18/2014 Last visit: 5/11/2024 Posts: 33015 Rating: (4079)
|
As I have already written to you in the public forum, without LSC you have no chance. Siemens has a tool to set a LOGO! 8.3 to the delivery state. The LOGO! then gets its original IP address and subnet mask, 192.168.178.003 and 255.255.255.000. You have to copy the file to an mSD card and then insert the mSd card into the LOGO. Then switch off the LOGO! and switch it on again. Remove the mSD card again after the startup is complete. Reset Tool for resetting LOGO! 8.3 to the delivery state |
Follow us on