4/14/2023 9:22 AM | |
Joined: 3/15/2022 Last visit: 8/10/2024 Posts: 14 Rating:
|
We want to run up to 4 pumps by pressing only a button, For example, pump 1, on service and by pressing button #1 again, pump 2 starts to run and so on. On the other hand, by pressing another button (button number 2) turn off the pumps one by one. I have designed the counting part, but I don't know how, how to run pump number 3 when the contour becomes number 3 , or when the contour is number 4 (the button # 1, four times pressed) is pressed 4 times), 4 motors come to service. Actually, my problem is how to relate contour numbers to outputs ? Attachmentcomprator.zip (533 Downloads) |
4/14/2023 10:01 AM | |
Joined: 6/19/2019 Last visit: 7/10/2024 Posts: 697 Rating:
|
Hello, I will don't know exatly or you whant this but i will add more 4 counter for every pump and now 1 push button press on fist motor second push second motor.... Attachmentcomprator.zip (398 Downloads) |
This contribution was helpful to
1 thankful Users |
4/14/2023 1:45 PM | |
Joined: 3/15/2022 Last visit: 8/10/2024 Posts: 14 Rating:
|
Thanks dear P.S. Thanks to your help, I changed it to my desired design. Attachmentcomprator rev 2.zip (503 Downloads) |
Last edited by: MSDHJP at: 04/14/2023 13:46:16Last edited by: MSDHJP at: 04/14/2023 14:11:38 |
|
4/14/2023 7:49 PM | |
Joined: 6/11/2019 Last visit: 8/17/2024 Posts: 2213 Rating:
|
And how about the example in the attachment? greeting Ella_68 AttachmentD-Switch4.zip (467 Downloads) |
This contribution was helpful to
1 thankful Users |
Follow us on