3/12/2012 12:58 AM | |
Joined: 1/24/2012 Last visit: 3/2/2024 Posts: 34 Rating:
|
This is a small portion of my project. I’m trying to get Q2’s timing cycle to repeat every time there is one minute remaining. The current design allows only one last minute cycle. In other words: 2 pulses from I1 starts Q1 timing cycle for 2 minutes. When one minute remains Q2’s cycle is initiated. Each additional pulse adds 1 minute to Q1’s remaining cycle time However, if I1 is pulsed with less than one minute remaining Q2 will not repeat with one minute remaining. AttachmentAccumulating Timer.pdf (220 Downloads) |
3/12/2012 9:26 PM | |
Joined: 12/27/2006 Last visit: 7/7/2024 Posts: 1197 Rating:
|
Look at the attachment Is this what your looking for? AttachmentCoins.zip (209 Downloads) |
3/16/2012 8:22 AM | |
Joined: 12/27/2006 Last visit: 7/7/2024 Posts: 1197 Rating:
|
No thanks at all. Therefor is this forum. |
This contribution was helpful to
1 thankful Users |
Follow us on