Navigation
Rating 
Thanks 0
8 Entries
| 6/11/2007 5:31 PM | |
|
Posts: 11 Rating:
|
I need to connect a 2 wire pressure sensor 4-20mA to a 331-7PF01-0AB0 a/d module. Can't find any info on this. Can you help???? |
| 6/12/2007 8:18 AM | |
Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating:
|
Hi To this type analog inputs card you can connect only termocouple elements. This link is description of module 6ES7 331-7PF01-0AB0 (russian language Best regards umencho |
| 6/12/2007 9:26 AM | |
|
Posts: 11 Rating:
|
Sorry. So many numbers I mean module 331-7NF00-0AB0 AI 8x16bit. |
| 6/12/2007 9:49 AM | |
Joined: 4/24/2006 Last visit: 11/18/2024 Posts: 8770 Rating:
|
Hello, Have a look at this manual: http://support.automation.siemens.com/WW/view/en/8859629 Chapter 6.3 will help you. Best regards, Wizard |
| 6/12/2007 10:03 AM | |
|
Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating:
|
Hi Sorry, It was the same like Wizard Best regards umencho |
Last edited by: UMENCHO at: 12.06.2007 10:07 |
|
| 6/12/2007 10:06 AM | |
|
Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating:
|
Hi Wizard, Sorry, Youhavebeen alwaysfaster Bestregards umencho |
| 6/12/2007 10:18 AM | |
|
Posts: 11 Rating:
|
Wow.... Thank you that's great. It has it all..... |
| 6/12/2007 10:36 AM | |
|
Joined: 4/24/2006 Last visit: 11/18/2024 Posts: 8770 Rating:
|
@GIH, Great you have found the information you wore looking for @UMENCHO, Let's say: It's a miracle  Best regards, Wizard |
Follow us on