Navigation
Convertin TP37 640x480 to MP277 10" 640x480 or MP377 15" 1024x768
Created by: SelcukB at: 2/17/2014 8:35 AM (4 Replies)
Rating 
Thanks 0
5 Entries
| 2/17/2014 8:35 AM | |
|
Posts: 5 Rating:
|
Hi, Is it possible to convert TP37 project to MP277 or MP377 ? Thank you
|
| 2/17/2014 10:45 AM | |
Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating:
|
Hello Selcuk, yes this is possible. Take a look at the migration manual at this link: SIMATIC HMI WinCC flexible 2008 WinCC flexible 2008 Migration With best regards |
| 2/17/2014 10:59 AM | |
|
Posts: 5 Rating:
|
I have already looked at it but I tried to open .pdb project with WinCC flexible but it was unable to open it. |
| 2/17/2014 1:50 PM | |
|
Posts: 5 Rating:
|
WinCC flexible SP3 :(... I will install SP2 and try it. |
Follow us on