hi all

i am trying to establish a connection between a LOGO 8 and

WINCC RT

i select a ktp 400 comfort ( no basic) that have RT option

but when i start run time

i dont see any change in screens and tags

please tell to me this job is correct or not ?

Are you sure that you have the connections in WinCC and in the logo program created right?
On this page there is an example of Siemens program for communication between WinCC as of version 11 and a logo.

http://w3.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/application-examples/Pages/Default.aspx

ixo65

Are you sure that you have the connections in WinCC and in the logo program created right?
On this page there is an example of Siemens program for communication between WinCC as of version 11 and a logo.

http://w3.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/application-examples/Pages/Default.aspx

 dear ixo65 thanks

my problem was in "Set PG/PC iterface"

now is ok

thanks for your help

New question published by neryoz is split to a separate thread with the subject WinCC TIA and LOGO! 8 communication.

Best regards
Min_Moderator