10/28/2019 2:54 PM | |
Posts: 4 Rating:
|
Did you get any solution for ultramat 23 to connect serial modbus through RS485? I have more than 20 ultramat23 and need to connect to station via 485 modbus We can get text file through SIPROM GA and then transfer to data Base IN BATCHED BUT NOT LIVE we HAVE NEVER UPDATE FIRMWARE ALSO , DOES IT HELP? MODEL: 7MB2337-8AG00-5CP1 CO/CO2 FIRMWARE# S79610-G210-A900 MOTHERBOARD fIRMWARE NUMBER:2.15.03 mOTHERBOARD BOOT VERSION:3.1 ASHESH PATEL [snip] ------------------------------------------------------------------------------------------ Attachmentgaht5_u2305553.pdf (185 Downloads) |
Last edited by: Jen_Moderator at: 10/29/2019 10:01:39New subject after splitting Last edited by: Jen_Moderator at: 10/29/2019 10:02:37Removed contact data. |
|
11/2/2019 6:33 PM | |
Joined: 3/28/2010 Last visit: 8/30/2024 Posts: 1055 Rating:
|
The ELAN protocol that uses the RS-485 port is briefly described on pages 59-62 of the current Ultramat manual, along with software and related firmware updates. https://cache.industry.siemens.com/dl/files/616/84233616/att_827672/v1/ULTRAMAT_23_english_en-US.pdf |
This contribution was helpful to
1 thankful Users |
Follow us on