Hi im new using logosoft

im trying to upload from pc to the logo the software and it throws this error at the image below

------------------------------------------------------------------------------------------
Split from Logo soft comfort cannot upload the program to logo device..

and my pc ip address nic is like this

PC> ip>        192.168.0.100

   net mask > 255.255.255.0

and all the logo in the bus line i dont know why take the ip 192.168.0.3, all of them

please if you can give me a quick answer, is for a big proyect with more than 1,000 logo installed.

in jamaica, i wanted to add to all one by one, but each one i go can not add the correct ip addres, 

the ip address i want to add to each logo is like> 10.90.0.1-10.90.1.254 (255.255.248.0)

if is necesary to make a remote connection i agreed.