6/1/2021 9:03 PM | |
Joined: 12/18/2014 Last visit: 5/26/2024 Posts: 33107 Rating: (4087)
|
What kind of control do you want? There have to be more information ...
|
6/1/2021 9:17 PM | |
Joined: 5/20/2021 Last visit: 4/8/2022 Posts: 55 Rating: (0) |
motor speed |
6/1/2021 9:20 PM | |
Joined: 12/18/2014 Last visit: 5/26/2024 Posts: 33107 Rating: (4087)
|
I know. But how? Via digital input (more or less)? Via LOGO! display (setpoint in x.x %)? Or other? |
6/1/2021 9:39 PM | |
Joined: 12/18/2014 Last visit: 5/26/2024 Posts: 33107 Rating: (4087)
|
I can give you only a example if you write exact what you want. |
6/1/2021 9:58 PM | |
Joined: 12/18/2014 Last visit: 5/26/2024 Posts: 33107 Rating: (4087)
|
Here's a example for setpoint with cursor keys.
AttachmentSetpoint_via_cursors_0BA8.Standard.zip (611 Downloads) |
Last edited by: ixo65 at: 06/01/2021 21:58:34 |
|
6/1/2021 10:50 PM | |
Joined: 5/20/2021 Last visit: 4/8/2022 Posts: 55 Rating: (0) |
i try your programm...the display is correct....but the pump doesn't work.... |
6/2/2021 6:19 PM | |
Joined: 12/18/2014 Last visit: 5/26/2024 Posts: 33107 Rating: (4087)
|
Did you know the the attached manual? You must make the right settings. Attachment80000-475 A2V_Flex-Pro (1).pdf (311 Downloads) |
6/2/2021 6:49 PM | |
Joined: 5/20/2021 Last visit: 4/8/2022 Posts: 55 Rating: (0) |
exmple for set point 44.7% i have 11.1 mA and 61% i have 13.7 mA in the AQ |
6/2/2021 7:35 PM | |
Joined: 5/20/2021 Last visit: 4/8/2022 Posts: 55 Rating: (0) |
i did the reset cursor...but how can i put timer or delay to stop automatically my pump like for 20s. |
6/2/2021 8:16 PM | |
Joined: 5/20/2021 Last visit: 4/8/2022 Posts: 55 Rating: (0) |
yes the currect from the AM2-AQ |
7/5/2021 5:17 PM | |
Joined: 12/18/2014 Last visit: 5/26/2024 Posts: 33107 Rating: (4087)
|
You can not add an delay timer before the AQ. And if you delay the AQ, the PI controller don't work correctly. |
Follow us on