Navigation
How can I Introduce time values from HMI panel in minute format?
Created by: RichardSapp at: 9/7/2011 4:47 PM (4 Replies)
Rating 
Thanks 4
5 Entries
| 9/8/2011 9:44 AM | |
Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating:
|
Hello, Perhaps can give you some ideas - How do you specify the runtime for a timer via an operator panel, or how do you output the remaining runtime? Best regards, Hristo MIhalev |
| 9/8/2011 2:55 PM | |
|
Posts: 24 Rating:
|
Hi! Thanks for your help! Not sure about how to use that information... Im currently working with a KTP600 HMI panel and TIA portal V10.5. What part of this link should I pay atention? Thanks in advance! |
| 9/9/2011 2:30 PM | |
Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating:
|
Hello, where you want to insert this values in....the recipe view or a single io-field? best regards |
| 9/9/2011 2:58 PM | |
|
Posts: 24 Rating:
|
Ok!!! I finally realised how to do it  ... actually, I found some help in this thread:/tf/WW/en/Posts/61534#top To complement that information, I show in the following picture how I did it: see attachment Now I can complete my recipes fields in minutes 
Attachmentlinearscaling.zip (1163 Downloads) |
Last edited by: O_Moderator at: 9/10/2011 11:26 AMpicture transferred to attachment |
|
This contribution was helpful to
|
|
Follow us on