KNX communication with PLC S71200 though CMK2000
Created by: iammrpi at: 11/28/2021 1:04 PM (4 Replies)
Rating 
Thanks 3
5 Entries
| 11/28/2021 1:04 PM | |
|
Posts: 2 Rating:
|
Hi everyone I have a small application for the KNX system. The system consists of 1 KNX button connected to LOGO! though CMK2000. I want to connect CMK2000 to S71200 without LOGO!. Can I do that? Thanks for reading. CMK2000 datasheet Attachmentlogo_cmk2000_ba_en-US.pdf (570 Downloads) |
Last edited by: iammrpi at: 11/28/2021 13:09:34 |
|
| 11/28/2021 3:29 PM | |
Joined: 9/27/2006 Last visit: 11/7/2024 Posts: 12293 Rating:
|
Hello lammrpi; This infformation might be too expensive for your application, if all you have is a single KNX button to control. But in the case of a larger project, the information of his document might interest you: - Communication with S7 CPU with KNX https://support.industry.siemens.com/cs/ww/en/view/109739689 The document gives you access to a S7-1200 project for the Profinet-KNX gateway proposed. Hope this helps, Daniel Chartier |
This contribution was helpful to
|
|
| 11/29/2021 5:02 AM | |
|
Posts: 2 Rating:
|
Thanks for the info, but I try to search for 0AB8 LOGO! series for this project in https://mall.industry.siemens.com/mall/en/WW/Catalog/Search?searchTerm=LOGO8&tab=Product; only 0AB1 available; I don't know this LOGO! can afford for KNX system. Can you help me? |
Follow us on