1/4/2022 3:48 AM | |
Joined: 9/27/2006 Last visit: 9/10/2024 Posts: 12282 Rating:
|
Hello Walter Jaquet; It is easy enough to locate the description of error 256, in the OP 35 manual: https://support.industry.siemens.com/cs/us/en/view/1142693 It is more difficult to help you apply the proposed solutions (see the scteenshot below). They all depend on your access to the original project file, since you cannot upload a modifiable program from the unit. The programming software mentionned in the manual is Protool, with version 1.3 and 2.0. Do you have this software on your programming PC, along with your project? Hope this helps, Daniel Chartier |
Follow us on