SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

ET200SP configuration with Redundant CPU 410-5H .

6/19/2023 1:22 PM	Rate (0)
desertfoxx Bronze Member Joined: 3/13/2014 Last visit: 11/15/2024 Posts: 55 Rating: (0)	Greetings, We are discussing with my colleagues whether a configuration like the following is possible -System is PCS7 9.1 and Redundant CPU 410-5H is chosen as Controller. -IOs will be distributed to 5 different Remote IO stations and ET200SP(not HA) will be used for Remote IO stations. IM 155-6 PN ST(6ES7155-6AU01-0BN0) will be interface module for these Remote IO Stations. -There will be a fiber ring between Controller and Remote IO stations There are 4 different Profinet System Redundancy(S1-S2-R1-R2). Which of these 4 different configurations can we provide with the hardware we will use above? Thank you.
	Last edited by: desertfoxx at: 06/19/2023 13:25:07
Suggestion To thank Quote Answer

6/21/2023 5:02 AM	Rate (0)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 11/14/2024 Posts: 3027 Rating: (1057)	desertfoxx IM 155-6 PN ST(6ES7155-6AU01-0BN0) will be interface module for these Remote IO Stations. There are 4 different Profinet System Redundancy(S1-S2-R1-R2). Which of these 4 different configurations can we provide with the hardware we will use above? S1 is the short answer as that it all that's supported by the IM 155-6 PN ST. If you'd go for a IM 155-6 PN HF, you can achieve S2 (and the HA will allow you to go for R1). Additional hopefully helpful links are: https://support.industry.siemens.com/cs/us/en/view/102325771 https://support.industry.siemens.com/cs/us/en/view/72887082 https://support.industry.siemens.com/cs/us/en/view/109756450
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users desertfoxx

6/21/2023 11:48 AM	Rate (0)
desertfoxx Bronze Member Joined: 3/13/2014 Last visit: 11/15/2024 Posts: 55 Rating: (0)	Thank you for the detailed explanations and documents. I understood the differences between these terminologies

Suggestion To thank Quote Answer

Share this page:

Share this page on...