1/12/2024 10:19 AM | |
Joined: 2/27/2023 Last visit: 5/28/2024 Posts: 2 Rating: (0) |
Hello, I am facing the same issue with a 315F PLC as the slave in Simatic manager and a 1511F PLC as the master in TIA Portal V18. I attached the I-Device settings in the 300 PLC. Are these right? I can't really figure out the table with the communication limits. I can see the bits coming in into my tag table, but not on the RCVDP block. Rody ------------------------------------------------------------------------------------------ |
Last edited by: AutoGen_8098349 at: 01/12/2024 10:19:41Last edited by: Jen_Moderator at: 01/15/2024 05:12:52New subject after splitting |
|
1/12/2024 10:20 AM | |
Joined: 2/27/2023 Last visit: 5/28/2024 Posts: 2 Rating: (0) |
And here are my TIA settings |
Follow us on