MASTERDRIVE: is it possible to program an input to reset the drive via a button
Created by: @AutoGen_702340 at: 2/20/2024 2:24 PM (1 Replies)
Rating 
Thanks 0
2 Entries
| 2/20/2024 2:24 PM | |
Joined: 2/20/2024 Last visit: 4/19/2024 Posts: 1 Rating:
|
Hi I would like to know if it is possible to program an input to reset the drive via a button. Every reboot the drive goes into failure F059 and so I would like to reset automatically. If so, how should I parameterize? ------------------------------------------------------------------------------------------ |
Last edited by: The Helping Hand at: 02/21/2024 08:30:58Text formatting optimized Last edited by: The Helping Hand at: 02/21/2024 08:31:57New subject after splitting |
|
| 2/23/2024 2:24 PM | |
Joined: 10/11/2006 Last visit: 11/18/2024 Posts: 5941 Rating:
|
Dear @AutoGen_702340, Pleas find the example of the Masterdrives VC compact attached. MC2.5: https://support.industry.siemens.com/cs/ww/en/view/109736627 VC: https://support.industry.siemens.com/cs/ww/en/view/109736629 AttachmentDI_vc_komp_acac_d_e.pdf (576 Downloads) |
|
With best regards, |
|
Follow us on