6/29/2015 11:35 AM | |
Posts: 2 Rating: (0) |
Hi the manual for the OP7 says it does not perform Life Bit Monitoring https://cache.industry.siemens.com/dl/files/112/1145112/att_35842/v1/Op717_e.pdf
So would you be using this on just the PLC side? My understanding of programming Siemens is a bit limited ------
Could this be configured to go into stop on communication loss?
Many thanks |
Last edited by: SPLCc at: 6/29/2015 11:37:16 AMLast edited by: SPLCc at: 6/29/2015 11:38:16 AM |
|
Follow us on