5/4/2015 9:37 AM | |
Posts: 94 Rating:
|
Hello Experts , Kindly suggest me the possible solutions . Find the attached document for your reference . AttachmentTelesis_Marking_MC.docx (485 Downloads) |
5/4/2015 1:37 PM | |
Posts: 3093 Rating:
|
Hello Satya, Regards, |
5/4/2015 8:36 PM | |
Posts: 94 Rating:
|
Hi Kaulquappe, I have already configured in(RA -0 v and RB-5v ) in CP HW configuration . As per my document RA(pin 4) is connected to patner x-(pin 12) and RB(pin 11) is connected to partner x+(Pin 13) and GND (pin 7) in CP is connected to GND(Pin 8) in patner side . Kindly suggest me for the same AttachmentTelesis_Marking_MC.docx (171 Downloads) |
Last edited by: SATYA SURAVIT at: 5/5/2015 7:26:19 AMLast edited by: SATYA SURAVIT at: 5/5/2015 8:12:13 AM |
|
5/5/2015 9:39 AM | |
Posts: 3093 Rating:
|
Hello Satya, Regards, |
5/5/2015 10:32 AM | |
Posts: 94 Rating:
|
Hi , Kindly find the attached snaps of CP-341 parameterization and dignostic buffer AttachmentCP-341.rar (241 Downloads) |
7/10/2015 2:17 PM | |
Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4767 Rating:
|
|
Follow us on