Dear all,

I have a PLC S7 1500 connected with a HMI (TP 177B), but i still got an error.

I already have done this: 

Did you check the setting "Permit accesss with PUT/GET communication from remote partner (PLC, HMI, OPC, ...)" under Device Veiw, CPU properties, protection?

But when i try to compile the HMI I get the following error:

"Invalid connection configuration. This communication driver cannot be used with the current HMI device!".

I thought maybe one of you have some ideas to solve this error?

Thanks in advance.

Nick Verstegen

 Nick, did you ever get any resolution to this issue? I have the same problem as you where the the portal shows that the s7 1500 communication driver is incompatible with my HMI.

nickverstegen

Dear all,

I have a PLC S7 1500 connected with a HMI (TP 177B), but i still got an error.

I already have done this: 

Did you check the setting "Permit accesss with PUT/GET communication from remote partner (PLC, HMI, OPC, ...)" under Device Veiw, CPU properties, protection?

But when i try to compile the HMI I get the following error:

"Invalid connection configuration. This communication driver cannot be used with the current HMI device!".

I thought maybe one of you have some ideas to solve this error?

Thanks in advance.

Nick Verstegen

New question published by Space24 is split to a separate thread with the subject Connection between S7-1500 and TP177B.

Best regards
Min_Moderator