9/3/2020 7:06 AM | |
Posts: 1 Rating: (0) |
Disclaimer: I'm relatively new to Siemens and tiaportal. The setup is a Siemens S7-1200 (1214c) with a cb 1241 board installed. I have connected 4 yaskawa p1000 drives over rs485 (I have done this before with codesys, but never Siemens). https://showbox.tools/ does anyone have a good example application to show timing of the MB_MASTER blocks? I had success with a laptop simulating the slaves, but with the drives installed, there's only error 8200. Alternative question; Would this be simpler to do over profibus? I don't know it, but I'm willing to learn.https://trackeasy.fun/usps/ |
Last edited by: trishnafile5 at: 09/04/2020 10:24:21 |
|
Follow us on