5/22/2014 3:12 PM | |
Joined: 4/20/2007 Last visit: 2/6/2024 Posts: 724 Rating: (42) |
Hi! I think you might have to download the HW including your IP for the 343 before you can use the 343.
|
5/22/2014 3:34 PM | |
Posts: 24 Rating: (1) |
i have updated and all firm ware fix same as what i have bought any idea? |
5/22/2014 3:41 PM | |
Posts: 515 Rating: (56) |
hello, also have a look at the below thread which might help you S7-1200 / STEP 7 Basic - Check list for first online access |
5/22/2014 3:41 PM | |
Posts: 24 Rating: (1) |
so what mac adress? sorry im newbie sir :( make same IP ? ip pc = ip cp343-1 lean? |
5/22/2014 3:46 PM | |
Joined: 4/20/2007 Last visit: 2/6/2024 Posts: 724 Rating: (42) |
Ip PC and ip Plc need to be same range but not the same ip. |
5/22/2014 3:47 PM | |
Joined: 11/26/2011 Last visit: 6/29/2023 Posts: 508 Rating: (22) |
MAC address is the unique address set by the manufacturer for all network devices. Amedia access control address(MAC address) is aunique identifierassigned tonetwork interfacesfor communications on the physical network segment Use PST Primary Setup tool for setting IP address to the device. Please go through the following Link to have more Idea and usage of this tool |
Last edited by: Madhava at: 5/22/2014 3:50 PM |
|
5/22/2014 4:13 PM | |
Posts: 24 Rating: (1) |
i connect ethernet cable to x1 my ip tcp v4 192.168.0.200 sub net 255.255.255.0 |
5/22/2014 4:47 PM | |
Posts: 24 Rating: (1) |
here the step i have do it |
5/22/2014 4:48 PM | |
Posts: 24 Rating: (1) |
and |
5/22/2014 4:49 PM | |
Posts: 24 Rating: (1) |
last |
5/22/2014 4:51 PM | |
Joined: 11/26/2011 Last visit: 6/29/2023 Posts: 508 Rating: (22) |
After this have you downloaded the same to CP card? |
5/22/2014 4:54 PM | |
Posts: 24 Rating: (1) |
download what sir? go onlinE? |
Last edited by: bfelixjo at: 5/22/2014 4:56 PM |
|
5/22/2014 4:58 PM | |
Joined: 11/26/2011 Last visit: 6/29/2023 Posts: 508 Rating: (22) |
You have to assign the IP address on CP Card. Now what you did is only with your LAPTOP. It has not been transferred to CP Card. If you don't know much about TIA portal. Lets try with Primary Setup Tool. Download that and read the manual . Search for the device and assign a IP address. Step by Step procedure has been explained in manual. AttachmentPH_Primary-Setup-Toolv41_76.pdf (386 Downloads) |
5/23/2014 8:06 AM | |
Posts: 24 Rating: (1) |
oh thx i know what you mean sir i must open PST_V4.1 for inject (Set up ) IP to cp 343-1 lean for online to PLC correct? |
1/27/2017 1:44 PM | |
Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4772 Rating: (123) |
New question published by fabia_mayara@hotmail.com is split to a separate thread with the subject Migration of Protool software to TIA V13. Best regards |
Follow us on