Hi all,

I've been searching though the internet and Siemens Documentation for the Technology module T100, that's written so good like the T300.

The actual problem is - I have a DP connection and Drive monitor 5.5 SP2.

With DM, P443 = 0x3002, however when I send a number from the PLC, it's not present (r447)

P444 = 100

However Looking at d045 I see the correct number from the PLC. This actual suprised me, It should be around the P694 area (?)

P090 = 2 TB

P091 = 1 CB

which are correct. So, 

1. Need good documentation about the T100

2. An Idea why the DP signal isn't getting to r437

Thank you for the documentation!

Now I can better analysis what's happening.

This will take awhile.