Hello !

Using the GetDisplayValue() script I am able to get the real-time values being displayed automatically & continuously. 

However if we move to other signal engineering object or we open any other application and come back to it the value is not updating. 

If we change tabs or right click>>refresh values then it will start showing the value again.
Should we select refresh option or change tabs to trigger the GetDisplayValue() so that the values update or should it be such that whether refresh or no refresh is done, whenever comos is selected the values should be updated automatically ? 

Please find attached the videos for reference

Best Regards,

Amira

amirahassan

Hello !

Using the GetDisplayValue() script I am able to get the real-time values being displayed automatically & continuously. 

However if we move to other signal engineering object or we open any other application and come back to it the value is not updating. 

If we change tabs or right click>>refresh values then it will start showing the value again.
Should we select refresh option or change tabs to trigger the GetDisplayValue() so that the values update or should it be such that whether refresh or no refresh is done, whenever comos is selected the values should be updated automatically ? 

Please find attached the videos for reference

Best Regards,

Amira

You can use the below line to refresh the attributes value of the entire chapter. Pass the tab owner as an argument.

Project.Workset.Lib.RefreshSpecValuesBySpecOwner(spec owner object)