Online Tech

Hello,

Perhaps the following points might help:

1-How do you enable and call the web server on LOGO! 8?

2-Port forwarding in the router setting"Remote side":

External Port

8080

Internal Port

8080

To IP Address

LOGO IP Address

Office PC"Local side":

http://public IP Address:8080

or

http://domain:8080

 I've done everything according to the manual(as you wrote above) and as I said, Webserver works fine so for me Logo comfort should work as well. I also installed the Logo App and there is also everything fine! I can connect to the controller with no issues.

I got my Logo comfort on a CD so it is full and legal. I tried on different PC with no luck

ixo65

Hello kill_gil,

you came from Germany? I made my DynDNS with "FRITZ!Box-Dienst". If you a german boy, please send me a PM.

Then we talk more....

 I'm from Poland. The router is a "TP LINK"

If anybody has an Idea what is going on or what could I check next please let me know.

To summarise :

1. I'm able to connect throught Ethernet with my LOGO.

2. I'm able to acces webserver from any place that I want. I can assume that port forwarding in router settings is OK.

3. The Logo app is running and connecting with no issues(tested even abroad).

4. Dynamc DNS in Logo comfort software fails(attached). Green bar appers after clicking "connect" but then asks for password.

5. Access control settings and passwords are sorted out. No combination gives any results.

the simple Logo controller is really a challange

I suggest you to test port 102 or 103.

For me was OK on Logo7.

Hello

Finally, I can connect with DNS, I can help yo

@Kill_Gil, on the TP-link you must activated the DMZ function in the firewall and provide the IP from the LOGO.

I did the same until my TP failed , the replacement does not have a problem like this.

aly peralta

Hello

Finally, I can connect with DNS, I can help yo